RE: fuel pupm shield

[Nick Tiberio <furyus63@xxxxxxxxxxx>]

Don,

Thanks for the info. Thickness .015, I'll have it tomorrow.

Nick Tiberio
Furyus





Don Dulmage wrote:
> 
> 
> I have the template for Don D's heat sink. Don or anyone, what is the 
> thickness of the aluminum so I can start this project. 
> Yup Don D does. Thiniest you can find. I use a rolled shet about015 that 
> i buy at our CtC stores but I am sure it is a univerally 
> availableproduct n most hareware stres. Even an aluminum pie plate would 
> work, in fact it would probably work very well to cut the material from 
> it. 
> Don
> Author of
> Return to Deutschland (True Adventure)
> Old Reliable (Mopar)
> http://altonapublicschool.faithweb.com/
> 
> http://seniordragster.bravehost.com/index.html
> [Non-text portions of this message have been removed]
> 



furyus63


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.