Re: brand of carburetor preferences

[Ted Albin <ted_albin@xxxxxxxxx>]

bumpstick! bumpstick bumpstick bumpstick. you'll be very happy with even a mild upgrade to the cam. easy. take care.



----- Original Message ----
From: Dave <civiltech@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Saturday, July 12, 2008 7:10:59 PM
Subject: RE: brand of carburetor preferences


Ted,
That's a good description of what I've got as far as the engine goes. I also
have a 4 speed. All of this is in a 1964 Dodge Polara 500 convertible. I
replaced the Carter with the Edelbrock last fall and don't even remotely
like the performance compared to the Carter. With the Carter 4 bbl opened
up, the car really jumped. The place that put the carb on is your average
auto repair shop that probably felt that the carb was on and working. No
disrespect to the job they did in any way. I want more performance out of
the car and didn't say it in a way that was totally understood. I don't want
to race the car, but when I have that urge to spend some of that expensive
gas quickly, I want to fell like I'm spending it fast!!

BTW, thanks for all the replies to my question.

Dave Harms


-----Original Message-----
From: Ted Albin [mailto:ted_albin@xxxxxxxxx] 
Sent: Saturday, July 12, 2008 6:01 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: brand of carburetor preferences


i ran a 750 on a 383 with a stock rebuild/mild cam. stock manifolds too. ran
like a clock. sweetest motor i've ever had. had it in three different cars. 


----- Original Message ----
From: Herb <zephyr9900@xxxxxxxxxxx>
To: 1962 to 1965 Mopars <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, July 12, 2008 6:16:21 PM
Subject: RE: brand of carburetor preferences


Dave; 

Check the 383 article in Nov & Dec 07 and Jan 08 Hot Rod before you do
anything, it probably will help.  With a stock engine and torqueflite your
going to lose low end power & some drive ability with a bigger carb. 


Herb 

1963 Sport Fury Convertible 361 
1970 Challenger RT 440 
1999 Durango SLT 5.9 
2006 300-C Heritage 5.7 
2008 SRT-8 Magnum 6.1 
St. Louis, MO. 


-------Original Message------- 

From: Dave 
Date: 7/12/2008 1:31:14 PM 
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: brand of carburator preferences 

I am wanting to replace the Edelbrock 600 on my 383 but am wondering if one 
Brand is better than the other. Am going to up the cfm to 750 in whatever 
Brand. What say you club members? 

Dave Harms


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 
--
[Non-text portions of this message have been removed]