SV: torsionbars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SV: torsionbars



That is preciesly what i am seeking, thanks for the link

-----Oprindelig meddelelse-----
Fra: Jim Altemose [mailto:jaltemoose@xxxxxxxxx] 
Sendt: 21. august 2008 16:07
Til: 1962to1965mopars@xxxxxxxxxx
Emne: Re: torsionbars


Knud,

Are you trying to determine what engine originally came with the car?
If so, the best thing you can do is get your original build records
from Chrysler Historical, which they still have and provide as a
service.  For $45 you can get original documentation for your car from
it's VIN that includes a photocopy of your original IBM punch card.
This tells all.  See link below.

http://www.chryslerheritage.com/pg904.htm

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Sat, Aug 16, 2008 at 5:13 PM, Gary H. <spigot2039@xxxxxxxxxxx> wrote:
>
> The guy forgot to put the picture online, but he writes: "Factory
installed torsion bars can be identified in several different ways.
Different colored paint splotches were used on the production line to
identify the bar both for size and location. The left side bar had two
splotches, the right hand side just one. These splotches are located about
12 inches forward of the anchor end of the bar. Orange splotches on this set
of 41 inch bars identify them as being from a B body with a slant six
engine.
>
> "The end of the bar contains several different marks including the part
number, the manufacturing date and a mounting location code."
>
> http://www.arengineering.com/articles/tbartango.html
>
> Gary H.
>
>
> -----Original Message-----
>
>>I have manage to totally dismantel the front and the k-frame on my 62
sport
>>fury. As my fendertag is non exist. I thought that maybe the numbers on
the
>>torsionbar would indicate an engine size? So here is the numbers if any
one
>>have the knowledge?
>>
>>In one end it is 331 DD CD L and on the other R
>>Opposing end it is 779 BCE
>>
>>Please if any one has the info!
>>
>>Best regards Knud Holm
>
>
> ----
> Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.