Re: lifters
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: lifters



It's a poly motor. The only mention or reference I can find in my FSM
is that the mark denotes a .008" overbore on the lifters...no other
sizes.

Does anyone know if they are available anywhere?

Bill M

On Tue, Dec 23, 2008 at 1:35 PM, Rich Kinsley <rlkinsley@xxxxxxxxx> wrote:
>
>
> Bill Maurits wrote:
>>
>> Anyone have a diameter on the lifters?
>>
>> On Tue, Dec 23, 2008 at 8:39 AM, Don Dulmage <big-d@xxxxxxxxxxxx> wrote:
>> >
>> >
>> > you may want to confirm .008 it may in fact be .0008
>> >
>> > I think that is more likey. In which case it is a good thing especially
>> > for,Hi perf.
>> > .
> ====================================================================
>
> I don't remember whether you had a 318poly or something else. The
> 318poly according to my '63 FSM shows the tappets to be .9040-.9045"
> with service tappets available in std, .001, .008 and .030" O.S.  Block
> clearance listed as .0005-.0018"
> Operating clearance (hot)  .013 intake  .o21 exhaust
>
>
>
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.