Re: Wiring harness wrap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Wiring harness wrap




if you look at the factory stuff carfully it is electrical tape without glue
to terminate just leave tape a foot or so long ,tie a knot in it then trim excess
friction tape can be got at yearone or eastwood
cheap ,easy  and exactly the way the factory did it
works well for working on later cars also


Any suggestions on what to use to wrap my wiring harness with? It
doesn't have to be OEM but I'd like it to look correct. Also is the
whole harness wrapped, even what is not seen? I guess it should be to
protect the wiring, huh?

Mike Phelps
1965 Plymouth Belvedere II Convertible
361/727
2004 Hemi Ram Quad Cab
2004 Chrysler 300M 3.5HO
2004 PT Cruiser 2.4 Turbo


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.