Re: Fury door panels
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Fury door panels





I did a two tone paint job on my door panels in my 62 Dodge Dart 440 wagon. I used Lt. Blue & Dk. Blue SEM paint over red door panels with out a problem. be sure to get the SEM Vinyl Prep too, it softens up the surface for better adhesion.

My 62 Dodge door panels came with 2 chrome strips on them already? maybe this was for the higher trim level 440's and Polaras only? now I am not sure if the 330 interior has the chrome strips or not? and Plymouth cars I am not sure of ?
If your cars are 4 doors or 4 door hard tops?
I have some extra door panels that are restorable, if your interested.
they are not Plymouth but they should fit all the same, I think that's what they
did in Canada, put the Dodge trim in their Plymouths.

otherwise your ideas sound great, so go for it.


Schuyler
62 Dodge Dart 440 wagon w/ Poly 318
 <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
FYI - I Do the Decal designs for the Poly head 318 and more! email me with your needs -
 <sky62@xxxxxxxxxxxxx>



On Mar 20, 2009, at 7:16 AM, 62pluckedchicken@xxxxxxxxx wrote:


go to flexchrome.com.. I bought the sample pack, if you live in the
omaha area stop by and take a look... a wide variety of mouldings, not
all chrome
Jeff Adams wrote:

I was thinking maybe some carpet along the bottom to hide it, like the
earlier cars had. I'd be interested in seeing pics of your idea, too.
Where can you get the flexchrome? I found 2 companies to make the
doorpanels...$800 and $1000 and both are 6-8 months behind!

62pluckedchicken@xxxxxxxxx wrote:

I have the same problem with my door panels (crappy on the bottom) what
I was planning on doing;

Paint the panels with SEM vinyl paint, find a contrasting color vinyl fabric for the bottom and hide the seam between the old vinyl and the
new vinyl with flexchrome molding.

I'll take pics when I'm done


Jeff Adams wrote:

I HAVE been mulling that one over in my head. Thanks
spigot2039@xxxxxxxxxxx wrote:

If you don't mind non-original, you can take what you have to a good car



upholstery shop and they can figure out what to do with the bottom. For example, put in a carpet-like piece like used in the '63 Polara 500 or a



matching piece of vinyl with a stitch or molding border. 2c

Gary H.

-----Original Message-----

Sorry for the OT post, but I need a good set of front door panels for a 68 Sport Fury. I'd prefer metallic red, but can dye them if necessary. I




can't find them new anywhere and my old ones are ate up along the
bottom. Legenday and YearOne don't carry them. They have the seat
covers, but no door panels...anybody have any ideas? Thanks

Jeff Adams
64 Polara



Jeff Adams
64 Polara



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.