Re: 3 on the tree

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

The only bushing I was able to find on a 3sp column shift lever was PN 
1676200.
There are a number of dealers that still have that part.
Valley Vintage lists it for $2.
Good Luck

Jimmy


Tom Duross wrote:
> I will call the local parts department but I kind of doubt I'll have much luck around Boston.
> The few times I've gone to inquire about parts for our cars (remember Akron Don's list?) they looked at me like I had 2 heads.
> I'll even buy a complete 62-65 column WITH shifter if anyone has a good one with a good bushing, pin and housing but I'd rather rebuild mine.  Can anyone suggest a good dealer source?  Anyone want to keep an eye out for me while they're walking the lanes at Carlisle?  My second year in a row I can't make it.
>
> Thanks
>
>
> Chrysler used to sell a 3-on-the-tree busing repair kit through the dealer parts department, at least they did for trucks. Have you looked into that possibility? 
>
> Thanks,
> Gary H. 
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
>
>
>   


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.