RE: dual master cylinder for 64 B body.... where to get?....tips & hints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: dual master cylinder for 64 B body.... where to get?....tips & hints



I went with a master from a 71-72 E Body over the counter part.
George


--- On Wed, 7/8/09, Rich Kinsley <rlkinsley@xxxxxxxxx> wrote:

> From: Rich Kinsley <rlkinsley@xxxxxxxxx>
> Subject: RE: dual master cylinder for 64 B body.... where to get?....tips & hints
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, July 8, 2009, 2:04 PM
> 
> I am sure you can use (and even must use probably) your old
> rod. I had 
> to use mine. I think you can use a wide variety of M/C's. I
> thnk the 
> Volare and Diplomat were a couple preffered ones.
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> =====================================================================
> W.A. Edison wrote:
> > 
> > I'm converting from drum to disc brakes on the front
> of my 64 Plymouth 
> > Sport Fury, using parts from a 73 Dodge Dart. I've got
> all the bits and 
> > pieces, including a proportioning valve, but I need a
> dual master 
> > cylinder. I can't seem to find an online vendor who
> sells one 
> > specifically for my car. I ordered one from
> PartsTrain, but they later 
> > cancelled the order. I see some companies on the 62-65
> vendors page that 
> > sell other stuff associated with the m/c like adapters
> and bushings, not 
> > what I'm looking for. Will other years m/cs fit my
> car?
> > 
> > Also, I should be able to use the push rod out of my
> old single master 
> > cylinder in my new setup, correct? Or will a new
> master cylinder come 
> > with a push rod I can use? I have manual brakes now
> and am staying with 
> > them.
> > 
> > Thanks in advance for your help.
> > 
> > /Butch /Ferndale, WA
> > 
> 
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.