Re: oil pan fitment

[Stevan Miner <miner@xxxxxxxxxxx>]

Hi Brian,
It would have to be leaking from the valve cover above as the exhaust studs 
do not go into the oil galleys-they do however go into the cooling system on 
all of the exhaust studs on the big blocks and the two end exhaust studs on 
the small blocks.
Stevan Miner
Miner Auto Service
Winnebago, MN


--------------------------------------------------
From: "Brian Safford" <hzf9vv@xxxxxxxxx>
Sent: Thursday, July 09, 2009 9:19 PM
To: <1962to1965mopars@xxxxxxxxxx>
Subject: Re: oil pan fitment

> While preparing to remove my oil pan to do this work, I noticed that
> there appears to be oil leaking from the lower exhaust bolt on the #7
> cylinder.  Is that possible or could it be leaking from the valve
> cover above?  It seems to be dry all around the area just below the
> valve cover gasket ...
>
> I hate these little leaks ...
>
> Brian
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.