Re: Torqueflite Cable Adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torqueflite Cable Adjustment



${top_text_ad}
Why don't you get the trans flushed? My buddy works @ Firestone and
they'll do a trans flush for ~$90. Gets all the bad fluid out. Worth
it in my opinion.

-- 
Bill M
65 Coronet 500 'vert
http://1962to1965mopar.ornocar.com/mmo62008.html

On Wed, Aug 12, 2009 at 4:57 PM, Dave Cornelius<lt7dave@xxxxxxxxx> wrote:
> Thanks for all the help, guys.  I decided to try fine tuning the adjusting wheel/nut.  My daughter worked the buttons while I made adjustments one hole at a time.  She was able to give me feedback until we had it dialed in and back to normal.  Now if I could just get it to stop plugging filters.  The first filter I put in it was plugged after just 6 miles, and then it wouldn't shift at all.  Up until then, it shifted great - no signs of trouble.  The filter was all gunked up - just like the one that was in it when I got the car.  My theory/hope was that it's junk working through the system - and maybe sediment in the cooler.  Rather than have the radiator boiled out (the radiator looks great), I bypassed the cooler and put in an auxilary cooler for 1/2 the price of boiling the radiator.  After another new filter went in, it shifted really nice in the driveway (once I got the cable adjusted).  But after about 15 minutes of running, no more shifting.  My
>  guess is the new filter is plugged again.  There weren't any chunks of anything nor any metal in the pan or filter both times I had the pan off - just sludge in the filter.  I haven't dropped the pan again yet - my time alottment for woking on it is up for today.
>
> I don't know enough about automatics to know if my theory is plausable yet.  Maybe there are other issues, but a new filter produced great shifting - at least initially - both times.  Why it's plugging up is the question.
>
> Dave
>
> --- On Wed, 8/12/09, Gary H. <spigot2039@xxxxxxxxxxx> wrote:
>
>> From: Gary H. <spigot2039@xxxxxxxxxxx>
>> Subject: Re: Torqueflite Cable Adjustment
>> To: 1962to1965mopars@xxxxxxxxxx
>> Date: Wednesday, August 12, 2009, 12:24 PM
>>
>> http://www.1962to1965mopar.ornocar.com/transtech.html
>> has some additional tips at the bottom.
>>
>> Thanks,
>> Gary H.
>>
>> -----Original Message-----
>>
>> >
>> >I need some sage advice.  I'm trying to get my
>> shift cable adjusted properly and am somewhat
>> lost.   ...

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.