Air cleaner rod?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Air cleaner rod?



It took me a while, but I finally got my 63 Polara back on the road.
I'm very excited.  It's a 383 and I swapped the 2 barrel for a 65
Carter AFB 4 barrel.

I was surprised to find that the air cleaner hold down rod that
threads into the carburetor is too short.  I figured I could just use
the 2 barrel rod in the 4 barrel, but it comes up short.  It's 4 5/8
inches long and threaded on the bottom and the top.

Does anyone know a source for a longer one?  I imagine I can get some
threaded rod at Home Depot or Lowes, but I'd prefer to have the right
part.

As always, thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.