Re: U-joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: U-joints




Yep, several manufactures make a U-Joint that is a combination of the small
& large spacing for MoPars.  I have gotten them from NAPA also.  They will
probably have to order it as NAPA stands for Never Any Parts Available!  (-;

              
 Herb 
 
1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1961 Belvedere Custom Suburban 318 Poly
1962 Dodge Dart 225 Slant Six
1963 Fury 2D/HT 6.1L
1963 Sport Fury Convertible 361
1999 Durango SLT 5.9L
2008 SRT-8 Magnum 6.1L
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
 
 
 
-------Original Message-------
 
From: Merwin Wrisley
Date: 05/17/10 13:43:11
To: 1962to1965mopars@xxxxxxxxxx
Subject: U-joints
 
 
    I changed the rear end unit in my '65 Coronet, and discovered the yoke
was bigger than
the one on the unit I pulled out, it is about 1/2 inch wider. It appears
that I'm going to use a different sized u-joint, has anyone run into this? I
can't change driveshafts due to the ball & trunnion on the front end. Any
information will be greatly appreciated,    Merwin
[Non-text portions of this message have been removed]
 
 
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www
1962to1965mopar.ornocar.com/general_disclaimer.html.
 
 
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.