RE: test and tune
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: test and tune




I don't know about the 426 block, but I have a 413 truck engine, which I've been told you can go crazy on.  I haven't done an engine in years so I might be talking out of my hiney, but it's for sale.

Jake
'63 Sport Fury 'vert




----------------------------------------
> To: 1962to1965mopars@xxxxxxxxxx
> From: ronsold102@xxxxxxxxxxxxx
> Subject: RE: test and tune
> Date: Tue, 25 May 2010 19:43:02 -0500
>
> ${top_text_ad}
> Hi mike
> Thanks for the details, again an awesome running machine. One of the
> 64s I have is a 426 4 spd wedge car from the factory and I'm debating
> whether to put a 426 wedge block that's been bored .100 (440 .030 over
> pistons) for originality or take a 440 and stroke it. I'm concerned about
> the amount of overbore on the orig 426 block (overheat not strong enough
> etc). Anybody out there have suggestions. I haven't bought the 426 short
> block yet, but it has the right casting numbers and date code for the car.
> Anyone have experience with the 426 wedge blocks being bored out that much?
>
> Ron
>
> -----Original Message-----
> From: mike creglow [mailto:mcreglow@xxxxxxxxx]
> Sent: Tuesday, May 25, 2010 10:25 AM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: test and tune
>
> ${top_text_ad}
> hi ron,
>
> Drive train:
> Motor: 400 block with 4.15" Eagle crank, Eagle 440 connecting rods,
> Ross forged pistons (12.5 compression), gap-less rings, Cam Motion
> custom grind mech flat tappet cam (.640"
> lift/ 283 duration @ 50), Indy SR heads that have been ported to max
> wedge size (valves
> 2.19/1.81), Indy single plane intake, Holley dominator (8896), MSD
> ignition system
> w/ digital 6-plus, crank triggered ignition, TTI 2"/2 1/8" step headers.
>
> Transmission: A-727 w/ Griner reverse pattern valve body, Ultimate
> (A Lopo understudy) 5100 stall converter, bolt in sprag, stock gear set,
> ultra-bell.
>
> mike
>
> On Mon, May 24, 2010 at 4:05 PM, Ron Soldani 
> wrote:
>>
>> OHHHH  YEAHHH awesome Mike. Could you let me know some engine details? I
>> just gotta 64 Fury that was a drag racer and I need to put a fresh motor
> in
>> it. I'd be kool if I could get some runs like that. Thx Ron
>
> ${bottom_text_ad}
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person. I.e., send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
> ${bottom_text_ad}
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
 		 	   		  
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.