RE: Oil priming

[Jeff <chargr1969@xxxxxxxxx>]

i don't prime anything. i dump half the oil in one valve cover and the other half in the other valve cover. never had any problems.       jeff













--- On Mon, 6/14/10, John <jswask@xxxxxxx> wrote:

> From: John <jswask@xxxxxxx>
> Subject: RE: Oil priming
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Monday, June 14, 2010, 11:29 PM
> 
> 
> 
> I believe someone said, when priming. Small blocks one way
> and big blocks the other. .   John Wask..
>  
> > To: 1962to1965mopars@xxxxxxxxxx
> > From: gary.futrell@xxxxxxxxx
> > Subject: Oil priming
> > Date: Mon, 14 Jun 2010 19:55:37 -0500
> > 
> > 
> > Anyone remember Don D's formula for oil priming ? I've
> got an engine
> > that I'm about ready to start-up and I've always just
> used a drill and
> > prime rod on the pump. I thought I might use Don D's
> method. I believe
> > he used a slow gravity feed , but I'm not sure where
> he fed the oil
> > into the engine.
> > 
> > 
> > Gary F.
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person -- directly to that person. I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic. Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> > 
>     
>         
>           
>   
> _________________________________________________________________
> The New Busy is not the old busy. Search, chat and e-mail
> from your inbox.
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 
>