RE: trim removal help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: trim removal help



Thanks Kevin I will check out the splash panel removal route also.

Kevin Merkley wrote:
> 
> Hi,
> 
> The emblem above the headlights is easily removed if you remove the 
> splash panel that is mounted to the inner fender and the backside of the 
> 
> headlight area of the front fender.  Then you use a socket and remove 
> the nut (or bolt, I cannot remember).
> 
> Drilling a hole and using a body plug is brilliant.  That way you do not 
> 
> break any of the small bolts that hold the splash guard in place.
> 
> regards,
> 
> K.
> 
> Wayne Huseby wrote:
> > 
> > Well I am almost finished removing all the trim before it goes out for 
> > painting. So many questions but here goes.
> > 
> > Is it a problem to remove the Mopar emblem on the sail panel without 
> > touching the headliner. I have not tried accessing it thru the courtesy 
> > lights. Is that the way to go?
> > 
> > The other problem I encountered is the Polara 500 wording directly 
> > behind the front wheel housing. I can only see one stud with a nut on it 
> > 
> > 
> > to remove, easy access. How is the other end of it being held on to the 
> > body?
> > 
> > How is the trim on the top of the doors and back seat (where you rest 
> > your arm to look cool) attached, more trim clips?
> > 
> > Another interesting roadblock I came across is the black plastic emblem 
> > above the headlight is in a housing. To remove the housing I plan on 
> > drilling a hole thru the wheel well to access it with a socket on an 
> > extension, then plug it later with a body plug. It is either that or 
> > remove the fender, NO WAY. Any other thoughts from anyone.
> > Thanks in advance.
> > 
> > Wayne Huseby
> > 64 polara 500
> 
> 
> 
> Kevin R. Merkley
> Thunder Bay, Ontario
> 64 Dodge 440 2dr HT (Cdn)
> 64 Dodge Polara 500 Convertible (Cdn)



Wayne Huseby
64 polara 500


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.