4 speed swap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

4 speed swap



I just swapped out my 64' tranny for a 1970 A-833 from a charger. I got 
a good deal on ebay for a tranny, brand new Hurst shifter, bellhousing 
and flywheel. My tranny was shot, as was my shifter. I had to swap the 
bellhousing, as the bearing retainers were different. I got a drive 
shaft made up. But the big problem was the tranny mount. It seems there 
were at least 3 different mounts. up to 1965, 66 thru 69 and 70 and 
later. We can get custom 66 thru 69 mounts thru Imperial Services but 
you must use an automatic crossmember. My mechanic welded up a one off 
mount from my original and got everything bolted up. A custom speedo 
cable from Imperial got me on the road in style. Upshifts are like 
butter. Down shifts from 4 to 3 and from 2 to 1 are good, but going 
across from 3 to 2 is hard. Maybe a shifter adjustment. Just thought I'd 
let you all know my experience and save someone some grief!!

Scott Mirabella
1964 Fury Convertible
383 4speed
LongIsland, NY


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.