Re: 8 3/4
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 8 3/4



They're stamped on the ring gear, too, but that is of no help if you're trying to determine it without removing the third member.

Dave

--- On Mon, 11/22/10, Tom Watters <tomwatters@xxxxxxxxxxx> wrote:

> From: Tom Watters <tomwatters@xxxxxxxxxxx>
> Subject: Re: 8 3/4
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Monday, November 22, 2010, 11:27 AM
> 
> On this one (Gear Date: Nov '64), its on the bottom, on the
> passenger side.  At about 7 o'clock.
> 
> The '70's chunk that I have isnt stamped on the bottom.
> --Tom
> 
> Donald Gallimore wrote:
> > Where on the housing would you find that information?
> > 
> >  Akron Don Gallimore
> > 
> > 
> > 
> > ----- Original Message ----
> >   
> >> From: Tom Watters <tomwatters@xxxxxxxxxxx>
> >> To: 1962to1965mopars@xxxxxxxxxx
> >> Sent: Mon, November 22, 2010 12:16:50 PM
> >> Subject: Re: 8 3/4
> >> 
> >> 
> >> The 3rd member that I got for my dart out of a '65
> Coronet had 2.93 Stamped  on the bottom of the
> housing.
> >> 
> >> Didnt find it until I scraped off about 1/4 
> inch of Grease/Oil. Pic -> http://www.forabodiesonly.com/mopar/vbpicgallery.php?do=view&g=4180
> >> 
> >> --Tom
> >> 
> >> MO  ( Steve Mick) wrote:
> >>     
> >>> Your method will work- IF- it has sure 
> grip positraction. ( when one wheeel   
>    
> >> is turned, the other wheel will turn in the 
> same direction)   Make a mark on the
> driveshaft and count the number of  turns it makes to
> one revolution of the tire. Figger the driveshaft
> into1/10  increments and it will get you very close to
> all known ratios that are  available. ie : a little
> over 3 and 2/10 turn of the driveshaft = 3:23 ratio-- 
> 3  and a little over 7/10 turns = 3:73 ratio
> >>     
> >>> If you do not have  positraction ( tires
> off the ground and turn in oposite   
>    
> >> direction  to the  other tire)  I
> think if you have both tires on the ground , move it 
> straight forward and count your driveshat turns to one tire
> turn , it will give  you the
> ratio...............................MO
> >>     
> >>> {Steve Mick}
> >>> http://stevemick.shutterfly.com/pictures#Part%202
> >>> ----- Original  Message ----- From:
> "Jimmy Peavy" <peaver63@xxxxxxxxxxxxxx>
> >>>  To: <1962to1965mopars@xxxxxxxxxx>
> >>>  Sent: Sunday, November 21, 2010 5:16 PM
> >>> Subject: Re: 8 3/4
> >>> 
> >>> 
> >>>       
> >>>>  There should be a tag on one of
> the  bolts, if someone hasn't taken it   
>      
> > off.
> >   
> >>>> You can do it the way you  say, but
> it's hard to get it exact.
> >>>> 
> >>>> On 11/21/2010 4:16  PM, harry skalla
> wrote:
> >>>>         
> >>>>> You know it has been  awhile, but
> I'm trying to find out what ratio my     
>      
> >> rearend is. I remember I think,  that if you
> jack up the rear, mark the driveline and turn the wheels one
> full  turn, and count how many times the driveshaft
> turns that will be close to what  your ratio is?? Does
> that sound right? Or is there some other way? I don't
> want  to pull the 3rd member out..Thanks
> >>     
> >>>>> [Non-text portions of this 
> message have been removed]
> >>>>> 
> >>>>> 
> >>>>>  ----
> >>>>> Please address private mail -- mail of
> interest to only one  person --     
>       
> >> directly to that person.  I.e., send
> parts/car transactions  and negotiations as well as
> other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This
> practice will protect your  privacy, reduce the total
> volume of mail and fine tune the content signal to 
> Mopar topic.  Thanks!
> >>     
> >>>>> 1962 to 1965 Mopar  Clubhouse
> Discussion Guidelines:
> >>>>> http://www.1962to1965mopar.ornocar.org/mletiq.html
> and           
> >> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >>     
> >>>>> 
> >>>>>       
>    
> >>>>  ----
> >>>> Please address private mail -- mail of
> interest to only one  person --     
>     
> >> directly to that person.  I.e., send
> parts/car transactions  and negotiations as well as
> other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This
> practice will protect your  privacy, reduce the total
> volume of mail and fine tune the content signal to 
> Mopar topic.  Thanks!
> >>     
> >>>> 1962 to 1965 Mopar Clubhouse 
> Discussion Guidelines:
> >>>> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> >>>> 
> >>>>         
> >>> ----
> >>> Please address private mail -- mail of
> interest  to only one person --   
>    
> >> directly to that person.  I.e., send
> parts/car  transactions and negotiations as well as
> other personal messages only to the  intended
> recipient, not to the Clubhouse public address. This
> practice will  protect your privacy, reduce the total
> volume of mail and fine tune the content  signal to
> Mopar topic.  Thanks!
> >>     
> >>> 1962 to 1965 Mopar  Clubhouse Discussion
> Guidelines:
> >>> http://www.1962to1965mopar.ornocar.org/mletiq.html
> and       
> >> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> >>     ----
> >> Please address private mail -- mail of interest to
> only one  person -- directly to that person. 
> I.e., send parts/car transactions and  negotiations as
> well as other personal messages only to the intended
> recipient,  not to the Clubhouse public address. This
> practice will protect your privacy,  reduce the total
> volume of mail and fine tune the content signal to
> Mopar  topic.  Thanks!
> >> 
> >> 1962 to 1965 Mopar Clubhouse Discussion 
> Guidelines:
> >> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ;
> 
> >> 
> >> 
> >>     
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> >   
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.