Re: 400 - now heads?

[Gary Wilson <gwwilson70@xxxxxxxxx>]

It may be that the trend is to go to aftermarket heads, but the 452s are still sought after by some.  I would rat hole them also. My brother in law builds engine with all factory blocks and heads and makes the run with the big boys. Usually beating them.

On Fri, May 13, 2011 at 2:30 PM, <62to65mopar@xxxxxxxxxxx> wrote:

Hi All,

Thanks for the recent (on the old mail list)  input on what to do with a 1976 400 motor. I'll save the basics of the motor for someone's stroker project.

How about the 452 heads that were on the motor? Scrap them? They need to be fully gone through. Isn't the trend nowadays to go to aftermarket aluminum heads?

Thanks,
Gary H.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxx.
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
Gwwilson

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx

For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.