Re: 727 Leaking Fluid like it was made in Great Britain
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 727 Leaking Fluid like it was made in Great Britain



Cool!
The only problem I see is the brass . Teflon would have been better.
Brass and aluminum do not co-habitate  well , together.
Mixing dis-similar non ferrous metals , such as brass, copper, aluminum, etc, is a prescription for electrolysis down the road.. The case is so thick that it may not occur as fast, but eventually, it will occur.

Jimmy

On 9/8/2011 7:03 PM, Ray Henry wrote:
When I sent my trans in, it was because of excessive leaking as well. But
mine wasn't as hard to find the problem on as a funky dowel. If the car sat
for more than about 8 hours, it would start a steady trickle out of the
casing where it was bored for the kick-down.

When they dismantled and cleaned the trans, they called me and told me I
needed a new casing. So I went to see why. The rod for the kick-down was
flopping around, as the bore had worn severely. Interestingly enough, it
also work perfectly round. So I had them measure the opening and the rod,
and spend a couple of days doing some research. Found a local shop that
stocked a brass bushing the perfect size, but longer. So I picked some up,
and they cut them down to fit in the casing below the seal. Worked like a
charm..... No more leaks....


- Ray



--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.