priming an oil pump

[MO <micher@xxxxxxxxxxxxxxx>]

 If you ever need to do this with the oil pump installed , try this.
You will need a oil pump priming shaft. Take the oil filter off. The
center threaded pipe.--.: take a grease gun and tape the end of the
flexible hose so it fits snuggly in that center hole. .Pump grease in
as you turn the pump backwards from its normal rotation.  This will
put grease into the pumps gear cavity, and then you can prime the pump
in the usual way..............................MO

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.