Re: Piston to valve clearance.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Piston to valve clearance.



I ran the .484 cam in my 440 '68 GTX with stock pistons and heads.   I
used that cam because it allowed me to still maintain the vaccuum
needed for the power disc/drum brakes.   It typically idled with 11
inches of vaccuum.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network