Re: Re: pinging surprise

[Mike & Deb <mdlefevre@xxxxxxxxxx>]

In the era our cars were designed Chrysler used ported vacuum to advance the timing to improve combustion and fuel milage. Therefore you should not find vacuum at the distributor at idle speeds. Just be sure to check for correct operation while timing.
Mike LeFevre

On Dec 15, 2011, Jacob Fox <imfast101@xxxxxxxxx> wrote:

I see, thanks. Ima look at it tomm, put a light on it, just to let yall know what it is on the number. I'm guessing counter clockwise is backing off correct? And do it without advance attached? 

Sent from my iPhone

On Dec 15, 2011, at 9:43 AM, Dodger7998@xxxxxxx wrote:

timing marks on an engine are only the starting point of setting the timing, after an engine has 20,000 miles or more on it there is no way to compensate for the wear in the components  with a light

 

In a message dated 12/15/2011 9:26:21 A.M. Central Standard Time, jaltemoose@xxxxxxxxx writes:

At idle, where should the timing mark be on the timing tab?

 

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

 

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.