Re: So I got the '62 300
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: So I got the '62 300



Looks like a good one! 

You can use the casting and ID numbers on the engine to figure out the year and ci. 

Likely there is at least one leaking wheel cylinder. 

Yikes, that's one Christmas journey you will not forget. Glad to hear you are okay, and the Chrysler likewise! 

Thanks,
Gary H. 
 
>  -------Original Message-------
...>  The engine is old looking but runs great and no leaks anywhere.
>  >  Looks like a 383 2bbl  or a secret experimental racing engine ...
>  
...>  
>  No brakes though. None.  New master cyclinder and booster.  He bleed
>  the brakes but still got no pressure then gave up.
>  
...  Nothing like laying
>  under a car on the the freeway at night with Christmas traffic flying
>  past.
>  ...

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.