Re: Poly Block Update-Not So Great

[furyus63@xxxxxxxxxxx]

Bill,

 

Do you belong to my Yahoo 318 Poly Group. We are 565 members strong and I'm sure there is one member close enough to you that has an extra Poly block. I'll help out if I can.

 

Nick Tiberio

FuryUs63

 

 

 

---

From: "Bill M" <y1topbanana73@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Thursday, January 5, 2012 8:48:49 PM
Subject: Re: Poly Block Update-Not So Great

The actual #3 "bearing surface" of the block and cap are much worse
than the thrust surface IMHO. #2 & #4 have some issues too. Not sure
that they are THAT common, but I'm going to see if you can find
another one. It looks like it's going to need enough align-boring that
I'm afraid I'll have to source one of those short (read $$$) timing
chains. Since the engine was free, maybe I can make some $ back at the
scrapyard!! And the machine shop shop felt sorry for me when they sae
the damage so they didn't charge me for the hot-tank. Right now I'm
only out some time.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.