Re: BB pushrods
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: BB pushrods



No deck change, steel shim head gasket same as stock, changed from
late open chamber heads to slightly trued closed chamber 516 heads,
476 lift cam. ....................MO

On Feb 4, 12:48 am, Dodger7...@xxxxxxx wrote:
> I can see no reason that your stock ones will not work,,,,,, what have you
> changed that would make a difference
>
> In a message dated 2/4/2012 12:46:35 A.M. Central Standard Time,
>
> mic...@xxxxxxxxxxxxxxx writes:
>
> Dodger!!! your still up???

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.