Re: front window vent question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: front window vent question



The pin is pretty simple to remove - finish nail, etc to punch it out. 

However, it seems to me that once you get the handle off, the end of the stud 
has a slot in it for a flat blade screw driver.  Seems that was a pretty snug 
fit. (corrosion?) Get the right width and thickness blade before you go at it.

 
Akron Don Gallimore



----- Original Message ----
> From: Gary H. <62to65mopar@xxxxxxxxxxx>
> To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
> Sent: Tue, July 24, 2012 10:03:43 AM
> Subject: front window vent question
> 
> Hi all,
> 
> Anyone have a tip on how to remove the bolt that goes through the  front vent 
>window? It has a chrome carriage bolt style head. Here is a  photo:  
>http://1962to1965mopar.ornocar.com/temp/front-door-window-vent.jpg
> 
> Thanks,
> Gary  H. 
> 
> -- 
> --
> Please address private email -- email of interest to  only one person -- 
>directly to that person. That is, email your parts/car  transactions and 
>negotiations, as well as other personal messages, only to the  intended 
>recipient. Do not just press "reply" and send your email to everyone  using the 
>general '62-'65 Clubhouse public email address. This practice will  protect your 
>privacy, reduce the total volume of mail and fine-tune the content  signal to 
>Mopar topic. Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion  Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
>http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> -- 
> You received this message because you are subscribed to the Google Groups  "The 
>1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
> 

-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.