Re: Brass Feeler Gauge- was '64 Sport Fury won't start.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brass Feeler Gauge- was '64 Sport Fury won't start.



Don,
The brass is used because it is nonmagnetic and thus will not interfere with feeling the drag on the gauge. I checked a 1976 FSM and a Chiltons, they both state to use a .008 gauge to set clearance and a .010 should not fit (no forcing).

On Jul 26, 2012, Donald Gallimore <dongallimore@xxxxxxx> wrote:

Brass feeler gauge.

I know you are supposed to use brass but why? Does it have to do with conductivity of steel and no conductivity for brass?  Just curious.
 
Akron Don Gallimore


From: Gary Wilson <gwwilson70@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Thu, July 26, 2012 11:28:43 AM
Subject: Re: '64 Sport Fury won't start.

Be sure to use brass feeler gauge.  Other will kill the relucter. 

On Thu, Jul 26, 2012 at 4:31 AM, Steve Chervinsky <63hemipolara@xxxxxxxxx> wrote:
Check the gap on the relucter and the pick up coil. Should be 17 thou.


 

--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.