Minimum starter - ignition wireing diagram
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Minimum starter - ignition wireing diagram



How well is your color perception?  These are great, especially in the larger format.
 
 
I get one for every car I get, they have proven to be invaluable.  Probably not as good if a person was color blind, but they are big and simplified. 
 
 
 
 
  Herb
 
1954 DeSoto Firedome Estate Wagon 276 HEMI
1956 Plymouth Belvedere 361 4-Sale
1959 Dodge Coronet 326 Poly
1961 Plymouth Belvedere Custom Suburban Wagon 318 Poly
1961 Dodge Dart Pioneer Wagon 318 Poly
1963 Plymouth Fury 2D/HT 7.0L Gen III HEMI
1963 Plymouth Sport Fury Convertible 361
1970 Chrysler 300 Hurst 440
1979 Dodge Aspen Sport Wagon 360
1999 Durango SLT 5.9L
2008 SRT-8 Magnum 6.1L
St. Louis, MO.
 
 &
 
 
 
-------Original Message-------
 
From: MO
Date: 7/2/2013 11:57:03 AM
Subject: Re: minimum starter - ignition wireing diagram
 
Thank you Jim, I can probably use that tip, but that doesn't help with my starter  system wireing   8-)     ..........................MO

On Tuesday, July 2, 2013 10:44:55 AM UTC-5, Pigpen wrote:
I ran 3/8 in my 63 Polara 500 when I converted to 4 barrel. Got a 3/8 sending unit from In-Line Tube that worked fine.
The only trick was the rubber boot for the wire connection was a little too long for the threaded connection on the unit.  I trimmed a little rubber off the boot and it's been good for 3 or 4 years.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


On Mon, Jul 1, 2013 at 10:45 PM, MO <mic...@xxxxxxxxxxxxxxx> wrote:
 I am ready to first fire Brutus. 1964 Dodge with 1978 440 engine) I can't quite see the wireing diagram . Google search has not been helpful-, I am bad at searching.  Anyone have a larger wireing diagram showing the starting motor and start relay??

 I know how to jump wire the ignition. what does the starter relay look like in terms of post's? I have a new ford soleniod  with the large stud one side and large stud other side , with two smaller studs on the front. 

Would it be--- Positive post on battery cable to one side of the solenoid or relay---- other large post on solenoid , cable to large post on starter....12 volt wire to one of the small post on the solenoid to activate the solenoid. And then what about the smaller stud on the starter-what goes to it??  Thanks for any help.............................MO

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.