Re: finding brake leaks

["Gary H." <62to65mopar@xxxxxxxxxxx>]

www.moparaction.com/tech/archive/disc-main.html‎ had a picture of this
"bench bleed a brake master cylinder on the car"  procedure
but that website - www.moparaction.com - is offline as I check it right now. 

You may want to check moparaction.com later. They must be too busy printing magazines to mess with a website. LOL 

Thanks,
Gary H. 


>  -------Original Message-------
>  From: mrrodder 
>  
>  In order to bench bleed a brake master cylinder on the car you need to
>  disconnect the brake lines at the master cylinder and replace them with
>  short lines that loop back into the reservoir. Make sure they go below the
>  level of the fluid in the master cylinder otherwise you won't be able to
>  tell if you have all the air out. Then have a friend slowly work the peddle
>  until there are no air bubbles coming out of the lines into the reservoir.
>  That will tell you there is no more air in the master cylinder itself. Once
>  you're sure all the air is out you can disconnect the short lines and
>  reconnect the brake lines. Then bleed the rest of the system.
>  
>  Good luck 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.