Re: [318poly] 472 Poly?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [318poly] 472 Poly?



If all goes well with the intake manifold project then I will explore the aluminum Poly head project...sure, aluminum Poly blocks would be nice but I hope to create the New Poly Alum. head so it will bolt on to the LA small block which solves the extreme expense problem of casting a dedicated Poly alum. block along with other advantages.
 
I have been in contact with Javier Vasquez of Foundry Works Inc. in Bell Gardens, CA and plan to spend this coming Wed. working on the finishing touches to the New Poly Wind Tunnel manifold. I suggested we change the name and description of this superior intake from an air gap design to a Wind Tunnel because that is what it is – huge airflow under & over the plenum and runners compared to the poplular Edelbrock small air circulation design rightly called the Air Gap.  This design will radically cool the air/fuel charge and enhance torque & throttle response.
 
If anyone has “missed” the $399 introductory price for our New Poly Wind Tunnel manifold please send me an e-mail “off-line” at glpavlovich@xxxxxxx and I will see about extending the low pre-order price for you as I don’t think Roland has met the 100 manifold threshold as yet.
 
Thank you,
 
Gary Pavlovich
 
 
 
Sent: Sunday, February 16, 2014 3:13 AM
Subject: Re: [318poly] 472 Poly?
 
 

You can buy an aluminum R-5 race block from some companies and then you would be able to get 440 cubic inches or more.
 
From: "speedautoshopfinland@xxxxxxxxx" <speedautoshopfinland@xxxxxxxxx>
To: 318poly@xxxxxxxxxxxxxxx
Sent: Sunday, February 16, 2014 3:33 AM
Subject: Re: [318poly] 472 Poly?
 
 
I'm just playing with the idea. I'm already building a 392 stroker. All aluminium poly is something we all would like to see someday.


__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (5)
.

__,_._,___

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.