Re: Poly Timing Cover & Water Pump Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Poly Timing Cover & Water Pump Bolts



Don't forget to use sealant on the bolts that enter the water jacket.

On Dec 5, 2014 12:49 AM, "Steve Mick" <micher@xxxxxxxxxxxxxxx> wrote:
I just take a extra long bolt, insert it into the hole till it gets to the thread, mark the bolt flush with the top of the hole, remove the bolt and measure its length to the mark, and then add 1/2" to 3/4" for how much you want the threads to engage in the block.  3/4" longer if you use a flat washer and lock washer.  I also use  a drill bit or rod and check to be sure there is no  debris in the bottom of the threaded hole.........................MO

{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5
----- Original Message ----- From: "Gary H." <62to65mopar@xxxxxxxxxxx>
To: <1962to1965mopars@googlegroups.com>
Sent: Thursday, December 04, 2014 9:00 AM
Subject: Re: Poly Timing Cover & Water Pump Bolts


Ah ha. That webpage gives you the count then, or the count should match the Poly timing cover you have. I can't recall offhand, but I think the bolts are all the same thread size but a couple are longer. Maybe you can take a small ruler or tape measure or something like a long wooden matchstick and use it to measure the depth where the bolt screws in?

Gary H.

 -------Original Message-------
 From: Bill M

 That's what I found that queued me into the extra bolt on a poly setup.


 Bill M


 On Wed, Dec 3, 2014 at 7:07 PM, Gary H. <[LINK:
 mailto:62to65mopar@xxxxxxxxxxx] wrote:
 I don't have the bolt info, but here is the timing cover comparisons
 (bottom of the page) and bolt explanation.


 http://www.1962to1965mopar.ornocar.com/poly318_1.html

 Thanks,
 Gary H.


 > -------Original Message-------

 > Can anyone provide me with a list of the count, size, & length of poly
 > timing cover & water pump bolts? After my tear down, mine seem to be
 MIA.
 > As I understand from a little research the poly's have 1 more
 timing
 > cover bolt (12 total?) than LA motors (11 bolts?) and kits only seem
 to be
 > for LA motors, so I was hoping to source the bolts locally and build
 my own
 > kit.
 >
 >
 > Bill M

 --
 --

--
--
--
Please address private email -- email of interest to only one person --  directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4235/8680 - Release Date: 12/04/14


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.