Re: Poly engine lift points
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Poly engine lift points



You could pull the intake off and use the straps on all four corners and use the bolt holes that mounted the intake to the head. I put in a B block & trans in that way work great.

On Friday, December 5, 2014 1:13:40 PM UTC-7, Plucked Chicken wrote:

Anyone have favorite lift points when yarding out and in a Poly 318?  I have seen those carb lift plates and it’s amazing to me that can hold the load.  Plan to leave the auto tranny in the car.  Light enough being first year of the aluminum case, but just figure why mess with the shift cables if I don’t have to.

 

I would even pull the heads off first if there is any advantage to that.

 

Thanks for any pointers - have not pulled an engine in over 20 years.  ; )  Assembling a new cherry picker and engine stand now for the task.  Also have an OTC load leveler with 4 attach brackets on chains.

 

Ric

’62 Dart wagon

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.