Re: ZDDP Additives
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ZDDP Additives



I'm going to do this as best as I can without starting a flame war, but...that makes NO freaking sense. Just because it's 10w40 weight (vs.10w30) does NOT mean it's going to arbitrarily "tear up your engine". Your "short and simple answer" is just plain wrong, The the additive packages that you are speaking of provides detergent agents, anti-scuff agents, etc. Newer additive packages may and are generally not good for old cars with flat tappet cams due to the lack of the zinc anti-scuff agents...they tear up catalytic converters in new cars. There's nothing wrong with 10w40 oil if has an applicable rating.

The way they create a multi-weight oil is by placing spring shaped polymers into the oil...they are in EVERY multi-weight motor oil. When the springs are cold, coiled up and compressed, it acts like 10 weight. Conversely when the springs get hot, they expand and thicken the oil. I know this for a fact as my father is a PhD chemist.

Bottom line is just because it's 10w40, doesn't mean much. It's the rating on the oil that makes the difference.

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

On Mon, Dec 15, 2014 at 8:19 PM, Herb <zephyr9900@xxxxxxxxxxx> wrote:
Tears up your engine.  The short & simple answer, to make 10w oil lubricate like 40w they add so much additive it cannot be held in suspension under the heat conditions your engine lives in.  The additive breaks down and becomes an abrasive thus killing your valve guides & piston rings/cylinders causing excessive wear.  New car manufactures just stop short of saying it completely voids your warranty but will not warranty any premature wear/damage caused by using 10w40 and it will damage your engine in the long run! 
 
When I said separate you from your money I meant selling you something that will do you no good.  This is a great example of marketing & politicks, if you tell someone it is so 12 times, they belive it is!  Back in the day they thought 10w40 was "all that", pennzoil advertised the daylights out of it and everyone believed it. Time has proven that is not correct.
 
 
 
 
-------Original Message-------
 
From: Bill M
Date: 12/15/2014 5:02:17 PM
Subject: Re: ZDDP Additives
 

I'm confused. What's so horribly wrong with 10w40 weight oil? You said that like its $1000/qt?

On Dec 15, 2014 5:48 PM, "Herb" <zephyr9900@xxxxxxxxxxx> wrote:
A good engine/machinist, Mechanic guy that knows what he is doing, or worth his salt would NEVER recommend 10w40!  A parts replacer/label reader or someone wanting to separate you from your money
Would.  Just my 2¢
 
Just like all my friends that install interiors jokingly tell people to use armor-all on their interiors and tops.  They know they will be ruined in short order and they get to sell stuff!
 
 
 
 
-------Original Message-------
 
From: Bill M
Date: 12/15/2014 1:25:50 PM
Subject: Re: ZDDP Additives
 
I've been running Valvolive VR-1 Racing oil which supposedly has enough zinc. All I can find locally is 20W50. With that said, my engine/machinist guy recommended Brad Penn or Joe Gibbs in a 10w30 or 10w40

 
 

 

--

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.