RE: Enquiry Dan Mathers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Enquiry Dan Mathers



Where do they need to be & how long do they need them?  I have a couple of what your looking for, that I could lone out for a while. 
 
 
 
 
                Herb
 
1954 DeSoto Firedome Estate Wagon 276 HEMI
1956 Plymouth Belvedere 361 4-Sale
1959 Dodge Coronet 326 Poly
1960 Chrysler Valiant V100 Wagon  170 3 speed
1961 Plymouth Sport Suburban Wagon 318 Poly
1961 Plymouth Valiant V200 Wagon  170
1961 Dodge Dart Pioneer Wagon 318 Poly
1963 Plymouth Fury 2D/HT 7.0L Gen III HEMI
1963 Plymouth Sport Fury Convertible 361
1970 Chrysler 300 Hurst 440
1979 Dodge Aspen Sport Wagon 360
1999 Durango SLT 5.9L
2008 SRT-8 Magnum 6.1L
2014 Dodge Journey
St. Louis, MO.
 
 &
 
 
 
-------Original Message-------
 
Date: 1/8/2015 9:30:08 AM
Subject: RE: Enquiry Dan Mathers
 

The post by Jason regarding headers for the Poly concerned me… At this point we DO have 1 ¾/3” collector long tube headers and 2 ½” and 3” exhaust systems for ’62-’66  C and B bodies made for us by TTI… We have communicated with them at some length to produce packages for the ’55-’61 cars and are waiting for some volunteers to schedule that era cars for prototype…

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Jason Rhoades
Sent: Thursday, January 08, 2015 8:35 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: Enquiry Dan Mathers

 

Dan: several of us have done some really neat things with the poly motors. Yes it's not a main stream package but you will be very happy with the poly once you have the car running.  They are amazing!  Mine pulled like a big block even with a decent sized cam in it and no headers.  If there is any way you can make headers I would recommend it that is a real hold up area in my opinion

Then get a big cam and loose converter if running a auto tran. People will be stunned at what that set up will do

Jason 

 

 

Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone



-------- Original message --------
From: Bill M <y1topbanana73@xxxxxxxxx>
Date:01/08/2015 9:16 AM (GMT-05:00)
To: danthetoolman1@xxxxxxxxx, 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Cc:
Subject: Re: Enquiry Dan Mathers

Dan,

Just a quick overview on the Poly...Rods down are the same parts as an LA 318/340 (rods, crank, bearings, oil pump). Front of the engine is the same as well (timing chain, timing cover, harmonic balancer, water pump). One note is that the water pump must be 67? and earlier as the water outlet is on the drivers side...unless you have a later radiator. Distributor and drive shaft are also the same.

Pistons, cam, heads, and valve gear are the different parts. Do plenty of research before you buy your parts, and make sure your machinist/builder has a great rep with lots of experience. He may not be the cheapest, but you get what you pay for.


I'm at the tail end of my build and will be happy to answer questions and share info with you if you like. Just email me.


Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

 

On Wed, Jan 7, 2015 at 7:06 PM, Roland Osborne <roland@xxxxxxxxxxxxxxxxx> wrote:

No books although if you tag up with the 1962etc group in the cc column
there is a ton of wisdom and experience there which we glean from
regularly... Ron Ceridono also noted has written an excellent book on the
GEN I Hemi which has a substantial section on the Poly... He has also done
an excellent two page spread in the latest issue of Street Rodder... Bruce
Toth and I are working on our own resource guide pages but that's the least
of our focus right now... We're way to busy developing the newest technology
parts programs... Stay connected with all these folks and you'll have a Hemi
spankin' Poly...

-----Original Message-----
From: Dan Mathers [mailto:danthetoolman1@xxxxxxxxx]
Sent: Wednesday, January 07, 2015 3:50 PM
To: Roland Osborne
Cc: Tammy / Chrysler Power
Subject: Re: Enquiry Dan Mathers

Thanks Roland for your quick response. I will get with the motor builder and
we'll come up with a plan then I'll start getting items ordered.
Do you have a parts book of some type for this motor?

Thank you
Dan

Sent from my iPhone

On Jan 7, 2015, at 3:58 PM, "Roland Osborne" <roland@xxxxxxxxxxxxxxxxx>
wrote:

> Cam is $295 and lifters are $119   Intake is $599 and attached are install
instructions to whet your appetite!
>
> -----Original Message-----
> From: Dan Mathers [mailto:Danthetoolman1@xxxxxxxxx]
> Sent: Wednesday, January 07, 2015 2:24 PM
> To: admin@xxxxxxxxxxxxxxxxx
> Subject: Enquiry Dan Mathers
>
> Needless to say I was more than thrilled when I found your web store.
> I have a 1966 318 poly a  that my engine builder said they do not make
parts for any more. So with that I went and loaded up the pieces and put
them in my shop. Just trying to figure out what to do next. Not wanting to
put a chevy in my 39 Plymouth coupe like everyone keep telling that's the
best way to build my car. For some reason that just kind of made me sick to
my stomach.
> The two main things I will be needing will be the new manifold you now
havre and a new cam. So my question for now does the cam come with the
lifters as a set?
> <POLY SS installation instructions 1.docx> <Poly Intake Manifold
> Release-2014.docx>

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network