Re: aluminum case A-727 leaks

[carverex@xxxxxxx]

I have read some very resourceful "fixes" in this thread. I went the easy way on the pan leak subject. I bought a new welded aluminum pan from Moroso. It has a very rigid 1/8" thick plate for the gasket rail, and comes with a very good gasket. Check it out........https://www.summitracing.com/parts/mor-42080.

I will also add as a leak potential is the tranny cooling lines. I think I'm fighting that demon now. I suspect after 50+ years of rubbing they've rubbed a pinhole in one. Just ordered new lines from SStubes (the filter delete option).

Best to all,

Lyle

'63 Sport Fury

On Tuesday, May 23, 2017 at 11:13:51 PM UTC-4, 62-65-mail...@xxxxxxxxxxx wrote:

Ricky asked "But seriously, how many seals are the in the aluminum case A-727?
My ’62 shifts fine, but drips – seriously thinking about taking it to Pat Blais just to replace all the seals if nothing
else......"

So maybe we can put together a list of common failure points on the PB 727 for leaks. Here are a couple to start:

* O-ring on the trans filler tube
* trans pan gasket

Others?

Thanks,
Gary H.





 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: Fury in Driveway.JPG
Description: JPEG image