Re: Vent window handle plastic tips - Review
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Vent window handle plastic tips - Review



Thanks for the review! 

Gary H. 


>  -------Original Message-------
  couple of the small parts added to my Joe Suchy order - something I
>  never would have thought of, didn't know was so handy. Kinda like a
>  back-up camera or heated steering wheel in a new car - then you wonder
>  how you got along without them.
>  
>  Install was easy - drilled out the old soft plastic with a #20 drill -
>  drilled a little deeper into the soft metal until the new button fit
>  flush. Simply pressed in easily and stayed put with no glue or
>  anything.
>  
>  I did find the bullet shaped top to be about twice too thick at about
>  .140 proud of the handle. Required excessive force to close. So I took
>  a 7/16 grade 8 washer that was .070 thick and double back taped it
>  over the #20 hole on my drill gage. Then using a sanding block and 100
>  grit paper sanded them each down to .070. Really work well now, and
>  more of a blunt nose bullet shape - I like it............... If you
>  have a lathe that would work too - but then you would probably just
>  make them yourself.........
>   

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.