The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Turn Signal Switch
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
Chris Hullinger
Posted 2009-05-19 10:25 PM (#174836)
Subject: Turn Signal Switch


Member

Posts: 29
25
Can someone scan the page from their 1957 service manual showing the wiring diagram for the turn signals. I replaced the switch in my '58 Coronet and the wires are a different color. With the mismatched colors, I can't determine which wire on the turn signal switch goes to which socket on the dash harness.

Thanks,
Chris
Top of the page Bottom of the page
1923wk
Posted 2009-06-14 4:04 PM (#177978 - in reply to #174836)
Subject: RE: Turn Signal Switch


Member

Posts: 19

I can't help you with the picture, sorry, but maybe you can still do me a favor. When you say you replaced your switch, I assume you mean the electric switch in the column that the signal lever connects to in order to turn on the right/left signals. If so, where did you get it, I finally tracked my 55's problem down to that little bugger. Thanks and good luck.
Top of the page Bottom of the page
Fanbladeus
Posted 2009-06-14 4:33 PM (#177981 - in reply to #174836)
Subject: Re: Turn Signal Switch



Expert

Posts: 1218
1000100100
Location: Warren, Michigan		Do you think it would be the same as a '58 Windsor? I could snap a pic as I have it out right now in my car. I'd also like to know where to purchase a new switch. I took my apart and cleaned all of the contacts so it should perform better but a new one would be nice.
Top of the page Bottom of the page
1923wk
Posted 2009-06-15 7:48 PM (#178086 - in reply to #177981)
Subject: Re: Turn Signal Switch


Member

Posts: 19

I really don't know but could probably tell from a picture. When I went into it to attempt some repairs, it was clear I wasn't the first one who ventured in there.
Top of the page Bottom of the page
chrysler300c
Posted 2009-06-16 1:29 AM (#178137 - in reply to #178086)
Subject: Re: Turn Signal Switch



Expert ,, George Passed away July 28th 2021, He will be Missed

Posts: 1295
1000100100252525
Location: Twin Falls, Idaho		There is almost always one on ebay.... look under "NOS MOPAR". If the wire colors don't match, then you need to do it by trial and error until you find the right combination.... takes a couple of hours.

George
Top of the page Bottom of the page
Fanbladeus
Posted 2009-06-16 10:40 PM (#178277 - in reply to #174836)
Subject: RE: Turn Signal Switch



Expert

Posts: 1218
1000100100
Location: Warren, Michigan		Here are pics of the switch and the plug from my '58 Windsor. You can ignore the yellow connector on the left. I was going to use that as a second ground. Hope it helps...



(SwitchWires.jpg)



(Plug1.jpg)



(Plug2.jpg)



Attachments
----------------
Attachments SwitchWires.jpg (42KB - 103 downloads)
Attachments Plug1.jpg (30KB - 100 downloads)
Attachments Plug2.jpg (35KB - 108 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)