The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Holes in back bumper 57 Belvedere
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
tuffshift
Posted 2010-01-25 11:14 AM (#206632)
Subject: Holes in back bumper 57 Belvedere


Veteran

Posts: 211
100100
Location: Iowa		Does anyone know what the two half-inch square holes are for in the center/middle part of the rear bumper on a 57 Belvedere?

Is something supposed to be mounted there...some accessory bling, or whatever? Can't seem to find any pics that actually show anything.....except a few that simply have chrome bolt heads showing.

Top of the page Bottom of the page
Rebels-59
Posted 2010-01-25 11:51 AM (#206634 - in reply to #206632)
Subject: RE: Holes in back bumper 57 Belvedere



Board Moderator & Exner Expert 10K+

500050002000500
Location: .Norfolk..Mafia.. ,England UK		Do you mean down Low in the middle. Here are a couple PICs of a 57 and 58



(98.jpg)



(99.jpg)



Attachments
----------------
Attachments 98.jpg (207KB - 84 downloads)
Attachments 99.jpg (95KB - 83 downloads)
Top of the page Bottom of the page
dukeboy
Posted 2010-01-25 12:41 PM (#206637 - in reply to #206634)
Subject: Re: Holes in back bumper 57 Belvedere



Expert 5K+

Posts: 6203
50001000100100
Location: Big pimpin'		That lower skirt attaches with two bumper bolts to brackets that run underneath the rear of car..Sounds like yours is missing the bolts/ and or brackets..There are THREE bolts and nuts that attach the skirt to the bottom of the rear bumper so It would still stay there without the lower brackets even on it...

Edited by dukeboy 2010-01-25 12:42 PM
Top of the page Bottom of the page
Rebels-59
Posted 2010-01-25 1:16 PM (#206644 - in reply to #206637)
Subject: Re: Holes in back bumper 57 Belvedere



Board Moderator & Exner Expert 10K+

500050002000500
Location: .Norfolk..Mafia.. ,England UK
dukeboy - 2010-01-25 5:41 PM

That lower skirt attaches with two bumper bolts to brackets that run underneath the rear of car..Sounds like yours is missing the bolts/ and or brackets..There are THREE bolts and nuts that attach the skirt to the bottom of the rear bumper so It would still stay there without the lower brackets even on it...


Use this link to Donnie,s Site for more PIC,s

http://www.phpbbplanet.com/plymouthrockres/viewtopic.php?t=4&start=...



(100.jpg)



Attachments
----------------
Attachments 100.jpg (60KB - 83 downloads)
Top of the page Bottom of the page
tuffshift
Posted 2010-01-25 3:26 PM (#206654 - in reply to #206634)
Subject: RE: Holes in back bumper 57 Belvedere


Veteran

Posts: 211
100100
Location: Iowa		Yep, that's them alright....the two which are down in what seems to be a "lower" part of the bumper itself.

According to the post which follows yours, the fellow says that part is held in place by being bolted to brackets behind the bumper.....the holes being where the attaching bolts go.

Interesting, the piece is definitely attached and not about to come off on its own, but there are no brackets that I can see and obviously no bolts in the mounting holes.

Guess all I really need to do is find a couple chrome bumper bolts and at least make it LOOK like its bolted on, heh heh heh.

Ok, thanks a lot for the response. Got a lot of little what I call "Mickey Mouse" things that need to be addressed before the season starts when I can start getting serious about taking it out for a "cruise".

Karl
Top of the page Bottom of the page
dukeboy
Posted 2010-01-26 7:29 AM (#206743 - in reply to #206632)
Subject: Re: Holes in back bumper 57 Belvedere



Expert 5K+

Posts: 6203
50001000100100
Location: Big pimpin'		Karl, you are more than welcome brother....Anytime I can help you can find me at the Christinecarclub...
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)