|
|
Expert ,, George Passed away July 28th 2021, He will be Missed
Posts: 1295
Location: Twin Falls, Idaho | I have just acquired a 1958 350 cubic inch mopar engine. As I read the parts manual, this was used in the 58 Dodge Custom Royal with 4 barrel carb, 58 Desoto Firesweep with 2 barrel carb and also the 58 Plymouth Fury with the Golden Commando option and 2x4 carbs. Also, I understand that all had the 10.0 to 1 compression ratio.... the only difference being the carburetion. This specific engine has the single AFB 4 barrel carb and apparently came out of a custom royal. It turns over but is very dirty. It is complete from air cleaner down to the pan with exhaust manifolds and generator. I am looking for offers from anyone interested. Sometime in the next couple weeks I will disassemble it and have it magnafluxed and if not sold by then will put it on ebay. I will post some pictures tomorrow night. I can be contacted directly at:
george@mckovich.com
or 208-308-2681
Thanks
George
|
|
|
|
Elite Veteran
Posts: 1172
Location: bradenton florida | what are you asking for it? does it turn over? |
|
|
|
Expert ,, George Passed away July 28th 2021, He will be Missed
Posts: 1295
Location: Twin Falls, Idaho | Yes, it turns over. As is, $1,000. I am going to get it magnafluxed in a couple weeks and if it checks out I will be looking for a total of $1,500 for the additional labor and expense. I can strap it to a pallet and deliver to a freight company, such as Yellow Freight or anyone else with a depot near Twin Falls, Idaho. OR you can schedule a pickup at my location and we can load with a forklift for them.
George
|
|
|
|
Elite Veteran
Posts: 636
| George your engine also went in ALL Dodge station wagons in '58, except for those with the either of the D500 options.
Sparky |
|
|
|
Expert ,, George Passed away July 28th 2021, He will be Missed
Posts: 1295
Location: Twin Falls, Idaho | Sparky.... Thanks for the info.
George
|
|
|