The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

PCV Set Up on a '59 Poly
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
Kenny J.
Posted 2005-02-02 1:19 AM (#23311)
Subject: PCV Set Up on a '59 Poly



Inactive by user's request

50001000
Location: Las Vegas, Nevada		I have a closed breather and PCV valve from an early '60s 361 or 383. These are the type that press into the valve cover pipes in place of the open breather and road draft tube.

If there is adequate flow through these, could I use them on a Poly 318 that originally came with a road draft tube? I remember some of you noting that a PCV system keeps the oil cleaner between changes. Or something to that effect.

K.

Edited by Kenny J. 2005-02-02 1:20 AM
Top of the page Bottom of the page
60 dart
Posted 2005-02-02 10:40 AM (#23331 - in reply to #23311)
Subject: RE: PCV Set Up on a '59 Poly



Expert 5K+

Posts: 8948
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA		KENNY------there are 2 types of breathers that are possible to use---push in and push over------they both will work but the push over gives a more cleaner look as it sits lower than the push in------the photo i'm giving is the correct fit-push over that fits the same as our down tube did------it's for a 426-year i don't remember but the valve i'm going to use is for the early engines-i think from 61-67------as for the filler cap i'll be using the stock for now until i find something a little more fancy(chrome)------here is also the link to the pages of the discussion where PANIC explains it all------if i can dig up a good photo of the pcv set with the pushin-i'll post that to and you can see that it sits HI but at the time i wanted my engine running so that is what i went with as a temp. fix--------------later

http://forwardlook.net/forums/forums/thread-view.asp?tid=74&posts=1...




(HPIM0231.JPG)



(HPIM0138.JPG)



Attachments
----------------
Attachments HPIM0231.JPG (95KB - 120 downloads)
Attachments HPIM0138.JPG (86KB - 109 downloads)
Top of the page Bottom of the page
alumcanTandThd
Posted 2005-02-02 3:55 PM (#23348 - in reply to #23311)
Subject: RE: PCV Set Up on a '59 Poly



Wise Old Village Idiot

Posts: 3591
20001000500252525
Location: Dellslow, West ("By God") Virginia !		Spanky! What did you do with the push in PVC valve I gave you off a older B 383 that was sitting in the back of the garage?
Top of the page Bottom of the page
60 dart
Posted 2005-02-02 4:09 PM (#23350 - in reply to #23311)
Subject: RE: PCV Set Up on a '59 Poly



Expert 5K+

Posts: 8948
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA		sittin on a shelf someplace in my garage------actually it's sittin in a can of solvent------later
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)