The Forward Look Network | ||
| ||
1957 Chrysler Standard Parts Catalog Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion | Message format |
miquelonbrad |
| ||
Expert Posts: 1737 Location: Hay Lakes, Alberta, Canada | So, I attended the fall swap meet in Red Deer, Alberta last Saturday, and I found a catalog I have never seen there. It is a "Standards Parts Catalog", put out by Chrysler Corporation of Canada LTD. It lists all the bolts, screws, clips, fasteners, washers, pipe fittings, pins, etc used in all of the '57 makes/models, with the part numbers and description AND what finish was applied to them! Has anyone ever seen a catalog like this? Does anyone want me to scan the pages, and have it copied? (043.JPG) Attachments ---------------- 043.JPG (68KB - 111 downloads) | ||
StillOutThere |
| ||
Location: Under the X in Texas | I would be very interested. Thanks. | ||
soiouz |
| ||
Expert Posts: 3480 Location: Montreal, Canada | What a find! I've never seen one! I'd be interested in scans too! | ||
catman |
| ||
Elite Veteran Posts: 781 Location: Montreal, Canada | Me too. | ||
miquelonbrad |
| ||
Expert Posts: 1737 Location: Hay Lakes, Alberta, Canada | Ok, I'll see what I can do! | ||
5wndwcpe |
| ||
Veteran Posts: 131 | Count me in ! | ||
57burb |
| ||
Expert Posts: 3967 Location: DFW, TX | Yes, please do. It will be a gold mine for the hobby. | ||
mstrug |
| ||
Expert 5K+ Posts: 6513 Location: Newark, Texas (Fort Worth) | me 4, marc. | ||
Chrycoman |
| ||
Expert Posts: 1819 Location: Vancouver, BC | And I'll join the line up. Have heard of the Standard Parts Catalogue but never seen one. In the Canadian Parts Catalogues when you look up Section 18, Standard Parts, you get an almost blank page. Prewar catalogues said to look up the Master Parts Catalogue while postwar they suggested you look up publication WM-XXXX, Standard Parts Catalogue. | ||
udoittwo |
| ||
Expert Posts: 1348 Location: Valley Forge, Pa. | I have see a FORD version and I have several different AC DELCO "POPULAR PARTS CATALOG"s and "DELCO REMY TBA PARTS MANUAL"s from the 60s and 70s. Fortunately one catalog came with a 40 page "AC DELCO - GM # CROSSREFERENCE" catalog. These cover more along the lines of tune up, shocks, carbs, switches, relays, ect. A MOPAR catalog would be a real nice find! | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13055 Location: Southern Sweden - Sturkö island | Great find - I'm interested as well!!! | ||
christine-lover |
| ||
Expert Posts: 2996 Location: Sept. 1958 | I'd be interested too. Maybe have a PDF file for it, then we can just print it out. | ||
chrysler300c |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 Location: Twin Falls, Idaho | I will take one also! | ||
jimntempe |
| ||
Expert Posts: 2312 Location: Arizona | I would like to get a copy if you scan it. | ||
57desoto |
| ||
Expert Posts: 1488 Location: New Castle PA | Add me, too! | ||
Leadfoot1000 |
| ||
Veteran Posts: 241 Location: Southern CA | Looks like a great addition to our technical libraries. Please count me in. | ||
57plybel |
| ||
Extreme Veteran Posts: 594 Location: Melbourne, Australia | Terrific idea !...i'll join up !
Colin | ||
miquelonbrad |
| ||
Expert Posts: 1737 Location: Hay Lakes, Alberta, Canada | I'm going to try to scan it all this weekend, since it looks like it will be raining... I think it will be easier if you all PM me your e-mail addresses, and then I can send it that way. There are WAY too many pages to post here on FL. | ||
My57Saratoga |
| ||
Elite Veteran Posts: 612 Location: Kingston Springs , TN | Me too! | ||
64300k |
| ||
New User Posts: 2 Location: Iowa | As a new member I could direct you this URL which lists the same information: http://www.jholst.net/55-58-parts-manual/standard-parts.pdf You could print out any or all of the pages. | ||
StillOutThere |
| ||
Location: Under the X in Texas | 64300k, That link is to a section that is in every parts catalog. It is grossly inclomplete compared to what I expect is in the scans being offered in this thread. | ||
64300k |
| ||
New User Posts: 2 Location: Iowa | Probably true. If any one wanted I could place this newer information on my site for all to look at. Any thing worthy is welcome. John... | ||
chrysler300c |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 Location: Twin Falls, Idaho | My email is: george@mckovich.com Thanks George | ||
miquelonbrad |
| ||
Expert Posts: 1737 Location: Hay Lakes, Alberta, Canada | Hi all, I am having issues with my printer/copier/scanner/fax. It doesn't want to play nice with my computer. I kinda wish that all those units were separate machines again... | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |