|
|
Veteran
Posts: 195
![100](http://www.forwardlook.net/forums/images/decorations/multiple/100.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) Location: SOUTH DUNEDIN NEW ZEALAND | Hi just enquiring on 1961 dodge phoenix speedo cluster is it the same as 1960 dodge pioneer ,phoenix, they look very similar, mine has a frosted see thru lens any information will be greatly appreciated
Thanks
Alan Smith
Sunny dunedin
New Zealand |
|
|
|
Veteran
Posts: 195
![100](http://www.forwardlook.net/forums/images/decorations/multiple/100.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) Location: SOUTH DUNEDIN NEW ZEALAND | Hi have figured out 61 dodge milage odometer is different from 60 problem solved |
|
|
|
Veteran
Posts: 173
![100](http://www.forwardlook.net/forums/images/decorations/multiple/100.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) Location: christchurch New Zealand | HI Alan, I am sure i have a 61 cluster, biggest snag with the 60/61s is a bounching speedo needle, the speedo shaft runs directly thru the die cast hsg
rather than thru a bush, as they wear the speedo is all over the place.
Geoff |
|
|
|
![](/forums/profile/get-photo.asp?memberid=2543&type=profile&rnd=479) Board Moderator & Exner Expert 10K+
Posts: 13062
![5000](http://www.forwardlook.net/forums/images/decorations/multiple/5000.gif) ![5000](http://www.forwardlook.net/forums/images/decorations/multiple/5000.gif) ![2000](http://www.forwardlook.net/forums/images/decorations/multiple/2000.gif) ![1000](http://www.forwardlook.net/forums/images/decorations/multiple/1000.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://www.forwardlook.net/forums/images/decorations/multiple/25.gif) Location: Southern Sweden - Sturkö island | I've repaired some speedometers using the small tube on the tip of a lead pencil. The pens with refill leads.
Just cut it off, adapt to the shaft and when all looks good secure with super glue. |
|
|