|
|
Elite Veteran
Posts: 1049
Location: Auckland, New Zealand. | Hi all.
During extensive bodywork on my 57 Plymouth, some rusted areas ended up as new metal and somehow I have lost the hole that the tail light earth wire earths to. I know it is on one of the screw holes that the rear inner tail light stainless fastens through, but I don't know which one. From memory, one of those tail light inner stainless securing screws was a machine screw and nut combination requiring a bigger hole for the machine screw to go through which accepts the earth wire, as opposed to the other inner tail light fasteners which were just Phillips head stainless panel screws.
Can anyone tell me which hole is the bigger one for the earth wire at the tail lights?
Could someone open the trunk of their 57 Plymouth and have a look at their tail light earth wire for me?
Thanks in advance.
Glenn. |
|
|
|
Elite Veteran
Posts: 852
Location: Etters Pa | Glen,
Here are a few pictures of ours having only 29,000 miles , I believe it would be safe to say these have never been touched..
Edited by BHWINC 2008-04-02 9:43 PM
(Picture 010.jpg)
(Picture 011.jpg)
Attachments ---------------- Picture 010.jpg (74KB - 92 downloads) Picture 011.jpg (83KB - 97 downloads)
|
|
|
|
Elite Veteran
Posts: 1049
Location: Auckland, New Zealand. | SUPERB pictures!!! Thanks so much!!! That is exactly what I wanted. I owe you one. Glenn. |
|
|