|
|
Veteran
Posts: 198
Location: Bornholm / Denmark | What size is a 1957 Fireflite engine, - 341 or 345 cui. ???
And what kind of oilfilter do I need..?? |
|
|
|
Expert
Posts: 3035
Location: N.W. Fla. | should be a 341 |
|
|
|
Expert
Posts: 2244
Location: Yorba Linda, Ca | It's a 341 Cowboy. Go "Here" (below) for all of the details!
http://www.angelfire.com/de/petrus/
Gary |
|
|
|
Expert
Posts: 3035
Location: N.W. Fla. | Oil filter Wix 51071 |
|
|
|
Veteran
Posts: 198
Location: Bornholm / Denmark |
Been there, - a lot of times, just couldn't find the engine specs.. ??
|
|
|
|
Veteran
Posts: 198
Location: Bornholm / Denmark | Mopar1 - 2010-01-10 7:32 AM
Oil filter Wix 51071
Thanx.. ;-) |
|
|
|
Expert
Posts: 1488
Location: New Castle PA | Fram C-233PL; Mopar 1821552, 1733882, 1121694; WIX 51071; AC PF316; Puro P70FF; NAPA 1071
Better yet, go here: http://www.power-21.com/FramPower21i/PartDetail.aspx?b=F&pn=C134PL Best source of oil filter interchange on the internet!
Yes, the engine is a 341 if the factory one... |
|
|
|
Expert
Posts: 3035
Location: N.W. Fla. | 57desoto - 2010-01-10 5:07 PM
Fram C-233PL; Mopar 1821552, 1733882, 1121694; WIX 51071; AC PF316; Puro P70FF; NAPA 1071
Yes, the engine is a 341 if the factory one... That's why I siad "Should be". Fram's reputation is low these days. |
|
|
|
Veteran
Posts: 198
Location: Bornholm / Denmark | -
Rosk auto says. FRAM Part # C134PL ..??
Will there be any adapter for spin-on types avalible..???
Edited by Cowboy 2010-01-10 6:13 PM
|
|
|
|
Expert
Posts: 3035
Location: N.W. Fla. | Cowboy - 2010-01-10 5:10 PM
-
Rosk auto says. FRAM Part # C134PL ..??
Will there be any adapter for spin-on types avalible..???
Spin on adaptors available from www.hothemiheads.com . OEM angle, straight down, or forward & remote. Use of a block in place of the check ball is recommended, also available from Hot Heads.
Edited by Mopar1 2010-01-10 6:29 PM
|
|
|