The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

383 Harmonic balancer
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
vantiloup
Posted 2010-02-09 4:07 PM (#208733)
Subject: 383 Harmonic balancer


Member

Posts: 8

Hi, I am looking to replace the balancer on my 1960 383. The original has a crack or two and I am reluctant to refit it. I have looked at aftermarket ones and they are either too thick or too thin. It is 7.25" which seems standard but the hole for the crank is 1 13/16" deep (46mm) as far as I can tell. Any ideas where I might find one?

Edited by vantiloup 2010-02-09 4:08 PM
Top of the page Bottom of the page
57chizler
Posted 2010-02-10 5:57 PM (#208939 - in reply to #208733)
Subject: RE: 383 Harmonic balancer



Expert

Posts: 3780
20001000500100100252525
Location: NorCal
That center hub depth of 1 13/16" is the same all the way until the end of production in '78.
Top of the page Bottom of the page
vantiloup
Posted 2010-02-11 8:07 AM (#209028 - in reply to #208733)
Subject: Re: 383 Harmonic balancer


Member

Posts: 8

Thanks for that.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)