The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

56 door glass vendor?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Vendor DiscussionMessage format
 
1956DeS
Posted 2011-01-03 2:51 PM (#255598)
Subject: 56 door glass vendor?


Elite Veteran

Posts: 774
5001001002525
Location: Atlanta GA USA		I need a recommendation for a vendor for '56 DeSoto 2 door ht glass, frong passenger side window.
I emailed Vic Phillips but would like a couple of others maybe closer by.

Thanks,

bg
Top of the page Bottom of the page
StillOutThere
Posted 2011-01-03 5:47 PM (#255613 - in reply to #255598)
Subject: Re: 56 door glass vendor?



2000100010010025
Location: Under the X in Texas		Go to the oldest glass shops in Atlanta. They should have actual patterns for your flat glass and all other makes back that far as well. If the first one you call doesn't have it, they should be able to tell you the granddaddy shop that does.
Top of the page Bottom of the page
1956DeS
Posted 2011-01-03 7:19 PM (#255629 - in reply to #255598)
Subject: Re: 56 door glass vendor?


Elite Veteran

Posts: 774
5001001002525
Location: Atlanta GA USA		Thanks. I did a search for "atlanta antique auto glass" and got some hits.
http://www.vintageglass.com/
http://briandiamondglass.com/
Top of the page Bottom of the page
stellarrestorations
Posted 2011-01-05 7:33 PM (#255912 - in reply to #255629)
Subject: Re: 56 door glass vendor?



Veteran

Posts: 194
100252525
Location: McPherson, KS		I might still have the old glass from the '56 we restored.  I don't think it was the original, but it would make a pattern.
Top of the page Bottom of the page
1956DeS
Posted 2011-01-05 7:45 PM (#255914 - in reply to #255598)
Subject: Re: 56 door glass vendor?


Elite Veteran

Posts: 774
5001001002525
Location: Atlanta GA USA		I can get it made locally w/o a pattern. Is the one you have unbroken and tinted? I've got a broken one. Thanks. Were you looking for plug wire cover screws?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)