Viewing a thread - BELT FOR THE AC ON MY 300E

You are logged in as a guest. ( logon | register )

BELT FOR THE AC ON MY 300E Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Heating, Cooling and Air Conditioning	Message format

mr .roadmaster

Posted 2011-05-04 4:17 PM (#271098)
Subject: BELT FOR THE AC ON MY 300E

Regular

Posts: 65

Location: Hoor Sweden

I need the belt for the AC / Generator for my 1959 300E. It is double belts that goes from the "crankwheel" to the AC compressor and to the generator.
As i have the AC i have the big 115amp generator.

I just cant find the right belt for it they are all to short.

PLS help me.

Thank you
Ola

phurious

Posted 2011-05-09 12:14 PM (#271777 - in reply to #271098)
Subject: Re: BELT FOR THE AC ON MY 300E

Extreme Veteran

Posts: 591
500

Location: West Chester, PA

Hello Ola, I have a 57 Fury with factory A/C. I don't know if the belts will be the same or not, but mine are listed below. Hope this helps!
Then numbers on my belts are:
2 X Compressor 7730 Gates 11A1885 (need two)
1 X PS Pump 7400 Gates 11A1015
1 X Fan 7355 Gates 10A0900
Good luck!
Ron

57chizler

Posted 2011-05-11 3:45 PM (#272095 - in reply to #271098)
Subject: RE: BELT FOR THE AC ON MY 300E

Expert

Posts: 3780
2000

Location: NorCal

The Rockauto website lists two AC/Generator belts for the '59 300, Gates 7695 or Dayco 15700...both are around 70" long. If it's a dual belt you need to be sure the belts are matched (same mold number) because lengths can vary with the mold.

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)