The Forward Look Network | ||
| ||
1957 Plymouth Belvedere 4drht 301/torqueflite Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Has a rear speaker, engine seized, super nice decklid, all the trim is there but some pieces are fastened by screws, headliner is AMAZING. Dashboard, speedo cluster, windshield, and push button selector are spoken for. Would like to sell the radio, rear speaker, rear speaker control knob, and original antenna as one lot if possible. Trunk mat is there but has some cracks, interior mats are rock solid. Has a windshield washer, all complete with foot pump. Seats are okay but of course need restored. Sunvisors are nice. PM me if you're interested in anything or email me at: theforgottenfins@gmail.com or forgottonfins@gmail.com.... I am keeping the lower grill, fender ornaments, and battery box. More photos coming soon. Thanks, Randy Edited by The Chrysler Kid 2016-01-11 5:20 PM (20160110_172726-800x450.jpg) Attachments ---------------- 20160110_172726-800x450.jpg (133KB - 264 downloads) | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | More photos. (20160111_152640_001-800x450.jpg) (20160111_153656-1365x768.jpg) (20160111_153749-1365x768.jpg) (20160111_153652-1365x768.jpg) (20160111_153459-1365x768.jpg) (20160111_153458-1365x768.jpg) (20160111_153455-1365x768.jpg) (20160111_153450-1365x768.jpg) (20160111_153546-1365x768.jpg) (20160111_153528-1365x768.jpg) (20160111_153151-1365x768.jpg) (20160111_153102-1365x768.jpg) (20160111_152731-1365x768.jpg) (20160111_152710-1365x768.jpg) (20160111_153042-1365x768.jpg) (20160111_153048-1365x768.jpg) (20160111_153050-1365x768.jpg) (20160111_152651-1365x768.jpg) Attachments ---------------- 20160111_152640_001-800x450.jpg (57KB - 245 downloads) 20160111_153656-1365x768.jpg (129KB - 238 downloads) 20160111_153749-1365x768.jpg (148KB - 236 downloads) 20160111_153652-1365x768.jpg (174KB - 264 downloads) 20160111_153459-1365x768.jpg (141KB - 265 downloads) 20160111_153458-1365x768.jpg (178KB - 230 downloads) 20160111_153455-1365x768.jpg (139KB - 256 downloads) 20160111_153450-1365x768.jpg (152KB - 259 downloads) 20160111_153546-1365x768.jpg (201KB - 235 downloads) 20160111_153528-1365x768.jpg (184KB - 233 downloads) 20160111_153151-1365x768.jpg (182KB - 251 downloads) 20160111_153102-1365x768.jpg (182KB - 255 downloads) 20160111_152731-1365x768.jpg (79KB - 241 downloads) 20160111_152710-1365x768.jpg (80KB - 247 downloads) 20160111_153042-1365x768.jpg (134KB - 238 downloads) 20160111_153048-1365x768.jpg (135KB - 251 downloads) 20160111_153050-1365x768.jpg (124KB - 254 downloads) 20160111_152651-1365x768.jpg (187KB - 269 downloads) | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Drivers door. (20160111_153201-1365x768.jpg) Attachments ---------------- 20160111_153201-1365x768.jpg (204KB - 258 downloads) | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Hood letters/hood trim spoken for. | ||
ozysteve |
| ||
Veteran Posts: 131 Location: Western Australia | Hi Randy, I am looking for the two center pillar top seals. driver and passenger sides. These are the seals that when the front doors close against the center pillar and likewise the rear doors at the hinges close, there is a seal that closes up the gaps. also, I think it includes the seal to the leading edge of the rear door windows when they are closed too........... Do you have them ? (door glass seal.jpg) Attachments ---------------- door glass seal.jpg (183KB - 257 downloads) | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Here you go Steve...send me a pm if you're interested. Edited by The Chrysler Kid 2016-01-12 7:47 PM (20160112_152946-800x450.jpg) (20160112_153033-800x450.jpg) Attachments ---------------- 20160112_152946-800x450.jpg (51KB - 239 downloads) 20160112_153033-800x450.jpg (51KB - 254 downloads) | ||
Finsinthemirror |
| ||
Elite Veteran Posts: 1116 Location: CA | Check you PM's please. | ||
Finsinthemirror |
| ||
Elite Veteran Posts: 1116 Location: CA | PM'd | ||
soiouz |
| ||
Expert Posts: 3480 Location: Montreal, Canada | Randy, dibs on the windshield, as you know. PM'd you for other stuff. | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Forgot to put it David! Also, headliner is sold. | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Windshield is now available. | ||
ozysteve |
| ||
Veteran Posts: 131 Location: Western Australia | Randy, , thank you for the PM...... Odd though.....yours look different to mine......im just wondering if mine have come apart and left the rubber from the rear doors stuck to the door pillar caps......if you look at my pic, you can see black rubber on the cap. Im wondering now, it the rubber is part of the rear door seal.........i can just see part of a seal on the door..... cheers steve | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | On this car that rubber comes out with the door when you open it. It's attached to the weatherstripping... | ||
PlymouthFury |
| ||
Expert Posts: 1324 Location: Hickory, NC | Is it even possible to remove the trunk mat without it being destroyed? Is it still somewhat flexible? | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | On my 60 fury, I am pretty sure (long time since I looked at them), the rubber part for those B pillar seals is molded to the metal part I believe Gary Goers does do reproductions, but you have to send him a core If I am right, it might be worth getting the ones Randy has sent to Gary as the cores? I really must do something with this plymouth of mine, no one wants to buy it and theres no point trying to part it here Anyway | ||
ozysteve |
| ||
Veteran Posts: 131 Location: Western Australia | i saw GGoers does them....and i do think they are part of the door seal......... problem is I dont want New looking ones.....just some very nice original ones....... Randy...........any chance of a pic of those door seals? Edited by ozysteve 2016-01-13 8:48 PM | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I have these for sale from a '58 4dr HT. (003.JPG) (014.JPG) (010.JPG) (011.JPG) Attachments ---------------- 003.JPG (200KB - 253 downloads) 014.JPG (161KB - 243 downloads) 010.JPG (133KB - 235 downloads) 011.JPG (137KB - 252 downloads) | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | ozysteve - 2016-01-13 8:44 PM i saw GGoers does them....and i do think they are part of the door seal......... problem is I dont want New looking ones.....just some very nice original ones....... Randy...........any chance of a pic of those door seals? I'll get them tomorrow, Steve sorry. I missed your message. Trunk mat survived being removed and is still flexible, but it sold. I sent you a PM Austin for the rest of the stuff... | ||
ozysteve |
| ||
Veteran Posts: 131 Location: Western Australia | no worries Randy, , when you get time mate. Thank you | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | B pillar end caps sold. Here you are Steve, not too good. Radio works, sound came out of both speakers. Interior trim, decklid, ribbed roof trim with clips, and trunk emblem listed on ebay. Edited by The Chrysler Kid 2016-01-17 4:17 PM (20160117_143110-450x800.jpg) (20160117_143155-800x450.jpg) Attachments ---------------- 20160117_143110-450x800.jpg (54KB - 232 downloads) 20160117_143155-800x450.jpg (57KB - 235 downloads) | ||
ozysteve |
| ||
Veteran Posts: 131 Location: Western Australia | sadly dead too.......thanks for going to so much trouble Randy these must ne a poorly moulded part from new..... mine are the same, if not worse than yours | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Bump, Decklid is straight and rust free.. Hood is also good... car still has all the trim. Including the roof trim, glass is good. | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | The radio works, however the paper of the rear speaker pretty much dissolved, front speaker is good and working. | ||
blocrybou |
| ||
Member Posts: 24 Location: belgium | Hello sorry with my english bit i want buy the molding with little stars on the shift buttom the parts on the left side up You now? Thanks | ||
mstrug |
| ||
Expert 5K+ Posts: 6502 Location: Newark, Texas (Fort Worth) | Email sent Randy. Marc. | ||
Paul Hettick |
| ||
Elite Veteran Posts: 705 Location: California | I could use the brake pedal pad | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Hi guys, sorry I have not posted what is sold, but heres whats left: Hood, Deck lid, ribbed roof trim and gutter trim, the front seat, and a few other odds and ends. everything else is sold. Paul, I still have the pedals, shoot me a PM if interested. Thank you. Edited by The Chrysler Kid 2016-05-09 11:56 AM | ||
SaratogaFan |
| ||
Veteran Posts: 149 Location: Iowa | What condition is the chrome "wings" on the trunk? | ||
Red58 |
| ||
Member Posts: 18 | Hi, I am desperate for the rubber Boot under the gas pedal that creates a seal from the gas pedal bracket to the floor. If it is in good condition please let me know. Thank you. Richard | ||
blocrybou |
| ||
Member Posts: 24 Location: belgium | HI, I am looking for dash trim set with little stars + bottom r , n, d , 1 +2 Shipping belgium? Thanks | ||
blocrybou |
| ||
Member Posts: 24 Location: belgium | sorry , buttom rnd12 | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Sorry red, boot is gone. Blocrybou sold the dash sorry. Thanks for your interest. | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | Pedals sold. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |