The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Chrysler's 1956 331 Poly
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
Rodger
Posted 2014-04-28 7:16 PM (#438340)
Subject: Chrysler's 1956 331 Poly


Expert

Posts: 1506
1000500
Location: Colo Spgs		Hola Yo'll

In 1956 Windsor's had a 2 bbl 331 and a 4 bbl 331.


Where is The ID Stamping for these engines ?


While I'm here --- what is The ID Stamping for a 1955 301 and the later 354 cubic inch size ?




Rodger and Gabby
Colo Spgs
Top of the page Bottom of the page
MOPAR-TO-YA
Posted 2014-04-29 1:33 AM (#438408 - in reply to #438340)
Subject: RE: Chrysler's 1956 331 Poly


Expert 5K+

Posts: 5139
500010025
Location: cornpatch county, Southwest IOA		Roger, The engine stamping is just in front of the valley pan on the block. Right behind the water pump. The 4 barrel 331poly would be the power pac option. I don.t know if the engine number will tell you that. Does the car have factory dual exhaust?.....................................MO
Top of the page Bottom of the page
Rodger
Posted 2014-04-29 11:08 AM (#438447 - in reply to #438340)
Subject: Re: Chrysler's 1956 331 Poly


Expert

Posts: 1506
1000500
Location: Colo Spgs		Steve

The 1956 Windsor has even the raised and chromed 250 on each rear fender.

I asked about the other years because it has been some time from 1956 and knowing what to look for eliminates "the what if's".

Not knowing where to focus my search to - I have the number 164864-1 from one head.



Rodger and Gabby
Colo Spgs
Top of the page Bottom of the page
MOPAR-TO-YA
Posted 2014-04-30 2:33 AM (#438580 - in reply to #438447)
Subject: Re: Chrysler's 1956 331 Poly


Expert 5K+

Posts: 5139
500010025
Location: cornpatch county, Southwest IOA
Rodger - 2014-04-29 10:08 AM

Steve

The 1956 Windsor has even the raised and chromed 250 on each rear fender.

I asked about the other years because it has been some time from 1956 and knowing what to look for eliminates "the what if's".

Not knowing where to focus my search to - I have the number 164864-1 from one head.



Rodger and Gabby
Colo Spgs
Yup, It is a power pak engine. I forgot about that 250 emblem. People ask me what a Z50 is. The #2 does look like a Z. The head number doesn't mean anything to me as my original engine was junk and mine had a DeSoto engine in it when I bought it.....................MO
Top of the page Bottom of the page
Mopar1
Posted 2014-04-30 9:29 AM (#438609 - in reply to #438580)
Subject: Re: Chrysler's 1956 331 Poly



Expert

Posts: 3035
2000100025
Location: N.W. Fla.		'56 Windsor should be model C71 with engine use code of WE55
Top of the page Bottom of the page
wayfarer
Posted 2014-05-04 11:12 AM (#439237 - in reply to #438340)
Subject: Re: Chrysler's 1956 331 Poly



Elite Veteran

Posts: 889
500100100100252525
Location: Peoples Republic of Oregon		Block codes here... http://www.qualityengineeredcomponents.com/?page_id=8
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)