Viewing a thread - 350 dies when warm

You are logged in as a guest. ( logon | register )

350 dies when warm Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> General Technical Discussion and Troubleshooting	Message format

henricthornsund

Posted 2015-05-17 9:44 AM (#478556)
Subject: 350 dies when warm

Location: Sweden

Tried to manage the problem by own knowledge but its still there. My 350 with a four barrel and TFlite starts and runs good until its warm, it then dies. I can restart the engine immeadiately without a problem, it Will run from 2 seconds to one minute, same procedure everytime. I have changed the coil, plugs, wires, points, rotor, cap, capacitor without any luck. The ballast resistor looks to be changed recently. So what do you Think of this? Thanks for Reading this through

mstrug

Posted 2015-05-17 10:22 AM (#478560 - in reply to #478556)
Subject: Re: 350 dies when warm

Expert 5K+

Posts: 6502
5000

Location: Newark, Texas (Fort Worth)

Try a new condenser, get spares of a good quality, a lot are crap these days. Marc.

jimntempe

Posted 2015-05-17 7:01 PM (#478600 - in reply to #478556)
Subject: Re: 350 dies when warm

Expert

Posts: 2312
2000

Location: Arizona

You replaced everything but the ballast resistor. I'd consider replacing it too.

58coupe

Posted 2015-05-18 1:08 AM (#478620 - in reply to #478556)
Subject: Re: 350 dies when warm

Expert

Posts: 1740
1000

Location: Alaska

This won't help, my first thought is the coil but you changed it. Coils are notorious for acting up when warm but ok cold and they do run warm. Could it be one of those "made in china" coils?

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)